Cold Storage Installation – Proper Drainage

Some customers often ask how to set up the drainage in a cold storage installation? Yes, the cold storing installation involves the problem of proper drainage. When the storage is operating, the evaporative air cooler of the refrigeration unit will create the frost or condensed water that will be produced after the unit is shut off. This will cause a build-up of water on the walls and ceilings of your cold storage area that may damage the insulation in the walls and ceilings, so you need to take a look at this problem and fix it.Increasing Demand for Industrial Cold Storage | Progressive Grocer

Usually, it happens when the condenser is positioned too close to the walls of your cold storage area, which is a sign that the water pipes are not wide enough to make it through the wall. You need to measure the space where your water lines are located. Also, if you see that the water pipes are too long or are leaking, you need to cut them. If you cannot do that yourself, hire the services of a professional who can do it for you.

The next step in fixing the water lines is cleaning. You need to wipe out all of your pipes and remove any grime and grease from the wall surfaces. Then, you need to clean the drain by using a hose. Then you will need to flush out the entire cold storage unit kho cap dong, and you need to let it dry before replacing the water line.

Once you have cleaned the drainage system, you need to make sure that your drainage system is connected properly. The best way to make sure that the connections are properly connected is to connect one end of the pipes to the main water line, then connect the other end of the pipe to the cold holding unit. If you connect both ends of the pipes, it can cause a clog in the drain system, which will require you to replace the entire drainage system.

The drain itself should be cleaned using a spray, which can loosen the dirt and grease that collect on the walls of the water lines, making it easier for you to spray the drain down. You will need to clean the drain by spraying the water down all the way through the pipes. Once you have done this, you need to spray it again down the drain line of the refrigerator, making sure to spray all the way through the pipes. and down to the bottom.

After doing this, you need to rinse the refrigerator off and make sure that all of the dirt is gone, as you will then need to drain out the drain lines of your cold storage unit. After that, you need to shut down the refrigerator and turn it back on. If you follow the instructions on the instruction manual, this should take care of all the drainage problems that are related to the storage unit.